Heidelberg Topsetter 102P Thermal CTP YOM 2003 und Multicassette Autoloader YOM 2004 optional Heidelberg Prinect MetaDimension and Heidelberg Prinect PrintReady with Cockpit and SignaStation
Article number: 43508
Listed in category: Prepress / Computer To Plate / Platesetters > Heidelberg Topsetter 102P Thermal CTP YOM 2003 und Multicassette Autoloader YOM 2004 optional Heidelberg Prinect MetaDimension and Heidelberg Prinect PrintReady with Cockpit and SignaStation from brakensiek.de
Heidelberg Topsetter P 102 Thermal CTP YOM 2003
and
Multicassetten Autoloader YOM 2004
optional (not included in this offer)
Heidelberg Prinect MetaDimension 2010 and
Heidelberg Prinect PrintReady 2010 mit Cockpit and SignaStation
This are original photos. The machine is ready for shipment.
Min. Plate format: GTO
Max. Plate format: 940 x 1160 mm
Productivity: up to 11 plates/h
Produced until now: approx. Ca. 96.000 plates
Including:
Machine was used with processless plates: Type AGFA Azura-TS
MCL Multi-Cassette-Loader (3 Cassettes) Type: 2342
Internal Conveyor (straight)
Plate Stacker, Blower
How AGFA Azura TS Plate work (source www.agfa.com)
Press a button, expose a plate !
Because there are no processing variables to worry about anymore, :Azura TS offers you
consistent and reliable plates, ready for use.
The :Azura TS plate uses the innovative, proven ThermoFuse™ coating technology.
This non-ablative thermal CtP technology gives consistent high-quality chemistry-free thermal CtP
plates without any compromise on press.
After exposure, the :Azura TS plates are cleaned and gummed in one simple step with the :Azura
Clean Out Unit (COU). This simple, compact and reliable unit requires no developer or replenisher.
Nor does the COU need a range of speed settings, brush speeds, pH monitors or temperature
controls. Everything is pre-set. The :Azura TS plate is ready in minutes with no possibility of image
degradation or variation. Thanks to its unique concept, :Azura TS gives you reliable, consistent and
care-free plate production.
Reliable Plates with Predictable Performance
:Azura TS is suitable for a wide range of commercial printing applications on both sheet-fed and
web presses. It delivers razor-sharp image defi nition without having to change press operating
conditions or working practices. It can hold up to 2-98 % screen tints at 200 LPI and 240 lpi
:Sublima, depending on platesetter capability and delivers runs of up to 100.000, depending on
press conditions. :Azura TS uses Agfa Graphics’ “Flat Grain Technology’, the high quality grained
and anodised aluminium substrate that results in uncompromising press performance with fast ink
roll-up and consistent ink/water balance. This shortens make ready, minimising paper waste and
downtime and all this using your existing press chemistry - there is no need to change inks,
founts or plate cleaners.
Not included:
Plate processor or Washing Unit
Conveyer to Plate Processor/Bridge
Heidelberg MetaDimension Direct + PC
Heidelberg PrintReady Workflow
Heidelberg PrintReady Cockpit
Heidelberg Prinect Signa Station
Topsetter 102P-MCL , Type: 2340 /D-24107
Service History:
The machine was manufactured in Kiel/Germany. It is a Screen Machine.
Machine was used with processless plates, was under service contract. Screen dismantled and locked the machines.
They defined the actual technical condition as follows:
Running time: 54592 hours, Actual running time: 10614 hours
Exposure time: 6002 hours
Plates: Plate winding time: 95156 plates
Trailing egde clamps: Clam cycles (max: 30000): 32625 times
Punch:
Punch cycles No.2: 42464
Punch cycles No.3: 6474
Punch cycles No.4: 34182
Punch cycles No.5: 95518
Punch cycles No.8: 42464
Punch cycles No.A: 40656
Punch cycles No.B: 95518
Laser diodes 32 stk/2540dpi
Diodes:
0=339mA, 1=350mA, 2=321mA, 3=359mA, 4=308mA, 5=105mA, 6=328mA, 7=238mA, 8=273mA, 9=317mA, 10=313mA, 11=309mA, 12=349mA, 13=325mA, 14=364mA, 15=304mA, 16=283mA, 17=305mA, 18=272mA, 19=244mA, 20=353mA, 21=256mA, 22=330mA, 23=185mA, 24=230mA, 25=348mA, 26=168mA, 27=350mA, 28=344mA, 29=305mA, 30=363mA, 31=317mA
Die Maschine wird im Nicht Neu Verkauf verkauft/ex works/as is.
and
Multicassetten Autoloader YOM 2004
optional (not included in this offer)
Heidelberg Prinect MetaDimension 2010 and
Heidelberg Prinect PrintReady 2010 mit Cockpit and SignaStation
This are original photos. The machine is ready for shipment.
Min. Plate format: GTO
Max. Plate format: 940 x 1160 mm
Productivity: up to 11 plates/h
Produced until now: approx. Ca. 96.000 plates
Including:
Machine was used with processless plates: Type AGFA Azura-TS
MCL Multi-Cassette-Loader (3 Cassettes) Type: 2342
Internal Conveyor (straight)
Plate Stacker, Blower
How AGFA Azura TS Plate work (source www.agfa.com)
Press a button, expose a plate !
Because there are no processing variables to worry about anymore, :Azura TS offers you
consistent and reliable plates, ready for use.
The :Azura TS plate uses the innovative, proven ThermoFuse™ coating technology.
This non-ablative thermal CtP technology gives consistent high-quality chemistry-free thermal CtP
plates without any compromise on press.
After exposure, the :Azura TS plates are cleaned and gummed in one simple step with the :Azura
Clean Out Unit (COU). This simple, compact and reliable unit requires no developer or replenisher.
Nor does the COU need a range of speed settings, brush speeds, pH monitors or temperature
controls. Everything is pre-set. The :Azura TS plate is ready in minutes with no possibility of image
degradation or variation. Thanks to its unique concept, :Azura TS gives you reliable, consistent and
care-free plate production.
Reliable Plates with Predictable Performance
:Azura TS is suitable for a wide range of commercial printing applications on both sheet-fed and
web presses. It delivers razor-sharp image defi nition without having to change press operating
conditions or working practices. It can hold up to 2-98 % screen tints at 200 LPI and 240 lpi
:Sublima, depending on platesetter capability and delivers runs of up to 100.000, depending on
press conditions. :Azura TS uses Agfa Graphics’ “Flat Grain Technology’, the high quality grained
and anodised aluminium substrate that results in uncompromising press performance with fast ink
roll-up and consistent ink/water balance. This shortens make ready, minimising paper waste and
downtime and all this using your existing press chemistry - there is no need to change inks,
founts or plate cleaners.
Not included:
Plate processor or Washing Unit
Conveyer to Plate Processor/Bridge
Heidelberg MetaDimension Direct + PC
Heidelberg PrintReady Workflow
Heidelberg PrintReady Cockpit
Heidelberg Prinect Signa Station
Topsetter 102P-MCL , Type: 2340 /D-24107
Service History:
The machine was manufactured in Kiel/Germany. It is a Screen Machine.
Machine was used with processless plates, was under service contract. Screen dismantled and locked the machines.
They defined the actual technical condition as follows:
Running time: 54592 hours, Actual running time: 10614 hours
Exposure time: 6002 hours
Plates: Plate winding time: 95156 plates
Trailing egde clamps: Clam cycles (max: 30000): 32625 times
Punch:
Punch cycles No.2: 42464
Punch cycles No.3: 6474
Punch cycles No.4: 34182
Punch cycles No.5: 95518
Punch cycles No.8: 42464
Punch cycles No.A: 40656
Punch cycles No.B: 95518
Laser diodes 32 stk/2540dpi
Diodes:
0=339mA, 1=350mA, 2=321mA, 3=359mA, 4=308mA, 5=105mA, 6=328mA, 7=238mA, 8=273mA, 9=317mA, 10=313mA, 11=309mA, 12=349mA, 13=325mA, 14=364mA, 15=304mA, 16=283mA, 17=305mA, 18=272mA, 19=244mA, 20=353mA, 21=256mA, 22=330mA, 23=185mA, 24=230mA, 25=348mA, 26=168mA, 27=350mA, 28=344mA, 29=305mA, 30=363mA, 31=317mA
Die Maschine wird im Nicht Neu Verkauf verkauft/ex works/as is.
Contact:
Your contact person: Tim Brakensiek
gebrauchtprodukt
last update:
22.05.2012
