EIZO RadiForce G20 1600x1200 2 Megapixel 1531 Graustufenmonitor für die Befundung + Matrox MED2mp-PCI Grafikkarte
Article number: 37193
Listed in category: Measurement / Monitorprofiling (Softproof) > EIZO RadiForce G20 1600x1200 2 Megapixel 1531 Graustufenmonitor für die Befundung + Matrox MED2mp-PCI Grafikkarte from brakensiek.de
EIZO RadiForce G20
final retail price in 2008 was loud .. EIZO Medical 2990 EUR plus VAT The successor GS220 now costs 3690 EUR plus VAT. and has only 2 megapixels.
The unit has no more warranty. It was produced 2005th
including PCI Matrox MED2mp
This graphics card is now offered, EIZO medical and UPE will cost 899 EUR plus VAT.
Non-new
The configuration is cleaned and tested. Defects are not known.
Sum of the last UPE both devices: 3880 EUR plus VAT.
Our retail price is 1,940 EUR plus VAT. = 2308.6 inclusive of VAT.
The following is the text of the EIZO web site "RadiForce" There you can also download a PDF file:
No Compromise: The G20 shows grayscale images on a large 20.1-inch diagonal with 2 megapixel and up to 700 cd / m² brightness. A calibration of the desired tone curves, such as DICOM is directly in control of the screen. The G20 is providing a 10.5-bit wide Look-Up Table is available. After calibration, the image reproduction is carried out with 8 bits, which corresponds to 256 simultaneously displayable gray tones.
• range of gray tones for accurate monochrome display 1531
• Sensor for constant brightness
• Prepared for calibration, acceptance and consistency testing to DIN 6868-57 and QS-RL
• 2 megapixel grayscale monitor for diagnosis
• Playback:
2 megapixel, grayscale
• Video quality:
Suitable for DIN 6868-57-compliant display for application categories A and B
• Image orientation: landscape or portrait format
• Viewable Size (W x H): 306 mm x 408 mm
• Visible Diagonal: 510 mm
• Ideal and recommended. Resolution: 1200 x 1600 pixels
• Dot Pitch: 0.255 mm x 0.255 mn
• Maximum displayable gray levels:
1531/256 of them at the same time (10.5 / 8 bit)
• Greyscale calibration: Yes
• Brightness stabilization control: Yes
• Maximum luminance: 700 cd / m
• Maximum Contrast: 1000:1 (typical)
• Recommended Brightness: 400 cd / m
• Max Viewing angle: Horizontal: 170 °, Vertical: 170 °
• Height adjustment: 82 mm
• Recommended graphics card: Matrox MED-2MP
Features:
Outstanding Image Quality: With a resolution of 1200 x 1600 pixels, a contrast ratio of 1000:1 and a maximum brightness of 700 cd / m², this superb image quality. Whether you look at the middle or sideways in front of the screen is, no matter how you look at the screen and even changing direction of view with different shades of gray remain clearly visible.
Accurate gray scale: the monochrome display is an internal 10.5-bit look-up table (LUT) is controlled by allowing a range of 1531 shades of gray. This is after calibration (eg DICOM curve) a loss-free reproduction of 256 possible shades of gray.
DIN 6868-57-compatible: The imaging characteristics, especially the brightness and contrast, allowing the establishment of DIN 6868-57-compliant image display requirements for the application category A and B.
Luminance: A sensor that is mounted behind the image plane, permanently luminance. Defined or calibrated values are reproduced exactly seconds after switching on and kept constant during operation.
Backlight Saver: The use of the backlight can be reduced with the backlight saver function. It works automatically on demand and is a member of the Screen Pro Medical Software. A screen saver similar on the backlight saver fluorescent tubes from electrical power when the screen is not used.
Automated lifetime analysis: The function (Lifetime Expectancy Analyzer) perma nent-calculated operating time and the stress on the backlight. This data is used for service quality assurance software RadiCS as computational basis for the remaining useful life at the recommended brightness.
RadiCS Optional software for calibration, acceptance and constancy tests. RadiCS with the associated sensor provides extensive testing and automatic adjustments to ensure a constant and consistent image quality on all RadiForce screens.
including PCI Matrox MED2mp
This graphics card is now offered, EIZO medical and UPE will cost 899 EUR plus VAT.
Non-new
Specifications
• graphics card designed for medical monitors
• 2 megapixel video card
• Bus Interface: PCI 64-bit or 32-bit PCI
• Ports: 2 x DVI
• Video Memory: 256 MB
• Screen resolution: 1200 x 1600
• Maximum power: 40 watts
• display configurations:
• Grayscale / Grayscale, Grayscale / Color, Color / Grayscale, Color / Color
• FCC Class A, Pt 14 grayscale DICOM compatible,
• 8-bit input / output 10-bit, 1024 shades of gray
• Supported operating systems:
Microsoft ® Windows ® XP, Windows 2000, Windows NT 4.0
• Includes manual and product CD
final retail price in 2008 was loud .. EIZO Medical 2990 EUR plus VAT The successor GS220 now costs 3690 EUR plus VAT. and has only 2 megapixels.
The unit has no more warranty. It was produced 2005th
including PCI Matrox MED2mp
This graphics card is now offered, EIZO medical and UPE will cost 899 EUR plus VAT.
Non-new
The configuration is cleaned and tested. Defects are not known.
Sum of the last UPE both devices: 3880 EUR plus VAT.
Our retail price is 1,940 EUR plus VAT. = 2308.6 inclusive of VAT.
The following is the text of the EIZO web site "RadiForce" There you can also download a PDF file:
No Compromise: The G20 shows grayscale images on a large 20.1-inch diagonal with 2 megapixel and up to 700 cd / m² brightness. A calibration of the desired tone curves, such as DICOM is directly in control of the screen. The G20 is providing a 10.5-bit wide Look-Up Table is available. After calibration, the image reproduction is carried out with 8 bits, which corresponds to 256 simultaneously displayable gray tones.
• range of gray tones for accurate monochrome display 1531
• Sensor for constant brightness
• Prepared for calibration, acceptance and consistency testing to DIN 6868-57 and QS-RL
• 2 megapixel grayscale monitor for diagnosis
• Playback:
2 megapixel, grayscale
• Video quality:
Suitable for DIN 6868-57-compliant display for application categories A and B
• Image orientation: landscape or portrait format
• Viewable Size (W x H): 306 mm x 408 mm
• Visible Diagonal: 510 mm
• Ideal and recommended. Resolution: 1200 x 1600 pixels
• Dot Pitch: 0.255 mm x 0.255 mn
• Maximum displayable gray levels:
1531/256 of them at the same time (10.5 / 8 bit)
• Greyscale calibration: Yes
• Brightness stabilization control: Yes
• Maximum luminance: 700 cd / m
• Maximum Contrast: 1000:1 (typical)
• Recommended Brightness: 400 cd / m
• Max Viewing angle: Horizontal: 170 °, Vertical: 170 °
• Height adjustment: 82 mm
• Recommended graphics card: Matrox MED-2MP
Features:
Outstanding Image Quality: With a resolution of 1200 x 1600 pixels, a contrast ratio of 1000:1 and a maximum brightness of 700 cd / m², this superb image quality. Whether you look at the middle or sideways in front of the screen is, no matter how you look at the screen and even changing direction of view with different shades of gray remain clearly visible.
Accurate gray scale: the monochrome display is an internal 10.5-bit look-up table (LUT) is controlled by allowing a range of 1531 shades of gray. This is after calibration (eg DICOM curve) a loss-free reproduction of 256 possible shades of gray.
DIN 6868-57-compatible: The imaging characteristics, especially the brightness and contrast, allowing the establishment of DIN 6868-57-compliant image display requirements for the application category A and B.
Luminance: A sensor that is mounted behind the image plane, permanently luminance. Defined or calibrated values are reproduced exactly seconds after switching on and kept constant during operation.
Backlight Saver: The use of the backlight can be reduced with the backlight saver function. It works automatically on demand and is a member of the Screen Pro Medical Software. A screen saver similar on the backlight saver fluorescent tubes from electrical power when the screen is not used.
Automated lifetime analysis: The function (Lifetime Expectancy Analyzer) perma nent-calculated operating time and the stress on the backlight. This data is used for service quality assurance software RadiCS as computational basis for the remaining useful life at the recommended brightness.
RadiCS Optional software for calibration, acceptance and constancy tests. RadiCS with the associated sensor provides extensive testing and automatic adjustments to ensure a constant and consistent image quality on all RadiForce screens.
including PCI Matrox MED2mp
This graphics card is now offered, EIZO medical and UPE will cost 899 EUR plus VAT.
Non-new
Specifications
• graphics card designed for medical monitors
• 2 megapixel video card
• Bus Interface: PCI 64-bit or 32-bit PCI
• Ports: 2 x DVI
• Video Memory: 256 MB
• Screen resolution: 1200 x 1600
• Maximum power: 40 watts
• display configurations:
• Grayscale / Grayscale, Grayscale / Color, Color / Grayscale, Color / Color
• FCC Class A, Pt 14 grayscale DICOM compatible,
• 8-bit input / output 10-bit, 1024 shades of gray
• Supported operating systems:
Microsoft ® Windows ® XP, Windows 2000, Windows NT 4.0
• Includes manual and product CD
Contact:
Your contact person: Tim Brakensiek
product request:
EIZO RadiForce G20 1600x1200 2 Megapixel 1531 Graustufenmonitor für die Befundung + Matrox MED2mp-PCI Grafikkarte
gebrauchtprodukt
last update:
22.05.2012
